Comparison: 1/100 mg strike rouge ootori ver.rm and 1/100 mg strike rouge

MG 1/100 Strike Rouge Ootori "Ohtori" (Phoenix)equipment ver. RM
Release Date: September 2013
Price: 4,200 Yen

The MBF-02 Strike Rouge is a mobile suit appearing in Mobile Suit Gundam SEED and its sequel Mobile Suit Gundam SEED Destiny. Its primary pilot is the Princess of Orb Cagalli Yula Athha. The word Rouge is the French word for the color red.  according to: gundam wiki

photo courtesy of: plamohub

photo courtesy of:  inb4suiton.blogspot.com



1/100 mg strike rouge ootori ver.rm. Same Aile strike gundam ver RM but just using a different Strike Pack

 1/100 mg strike rouge -- good old pink suit

photo courtesy of: plamohub

photo courtesy of:  inb4suiton.blogspot.com

nice concept art for the pack. I just hope they include all the weapons and gimmicks on the kit.

Model Number     MBF-02
Developed from     GAT-X105 Strike Gundam
Variants   

MBF-02+AQM/E-X01 Aile Strike Rouge
MBF-02+P202QX Strike Rouge IWSP

First Seen   
September 26, 71 C.E.

Manufacturer   
Morgenroete Inc.

Operator   
Orb Union
Three Ships Alliance

Known Pilots   
Cagalli Yula Athha
Kira Yamato 

1/100 mg strike rouge -- includes the lauch pad and all the weapons. its basically the orignal strike in pink. As for the strike rouge ootori ver.rm its going to be pink as well but its the strike ver rm. im not sure if they would include the luach pad

photo courtesy of: plamohub
concept art for the strike rouge ootori ver.rm with the back pack attached

Well for me this kit is just like the Strike RM but in pink. The best part of this kit would be the new pack included and all the weapons. So far as per the picture on the internet it may not have the lauch pad but would instead have the regular flight stands just like the one inculded in the Mg strike IWSP.
Like you guys i cant wait untill this kit goes out in the market.

1/100 Master Grade Gundam Exia

The unit is piloted by Setsuna F. Seiei. The GN-001 Gundam Exia is the close combat Gundam featured in both seasons of Mobile Suit Gundam 00.

Profile

Model Number GN-001

Namesake Exousia

Developed from GNY-001 Gundam Astraea

Developed into

GN-0000 00 Gundam

GN-0000/7S 00 Gundam Seven Sword

Variants

GN-001/hs-A01 Gundam Avalanche Exia

GN-001RE Gundam Exia Repair

First Seen 2302 A.D.

Last Seen 2308 A.D.

Manufacturer Krung Thep

Operator Celestial Being

Known Pilots Setsuna F. Seiei

Head Height 18.3 meters

Standard Weight 57.2 metric tons

Power-plant GN Drive

Pilot Accommodations Pilot only, cockpit in torso

Armor E-Carbon

GN Composite Armor

As a close quarters unit, there is need for its movements to be as human-like as possible this was the main design of the Exia.

Exia was designed with joints that have the same range of motion as a human. To make sure that Exia's range of movement is not affected, the exia armor is seperated into much finer pieces than the other  Gundams. 

This design would mean that portions of the internal structure is revealed during certain movements and pauses.

Its served Exia as it has the lowest hit rate among the four main 3rd Generation Gundam designs.

Armaments : 

GN Shield

2 x GN Vulcan

2 x GN Beam Dagger

2 x GN Beam Saber

2 x GN Long Blade

GN Short Blade

GN Sword 

To deal with any traitor units that use GN Field technology is One of Exia's important intended roles.

Exia's solid swords are all designed with the ability to easily pierce any GN Field usage on contact

At the time when Exia's solid swords were still incomplete, they made their completion an urgent priority. A higher level of responsibility was given to Exia's pilot.

The kit was built out of the box. No modifications done. Its a very easy build no fit issues. Color separation is good. I had some problems using the kit supplied dry transfer markings. they are really such a pain to apply. I used tamiya acrylic paints thinned by tamiya acrylic thinner applied using my tamiya airbrush.

 I used tamiya acrylic paints thinned by tamiya acrylic thinner applied using my Tamiya airbrush.

Decanted and thinned Bosny paints for the main body color. I used white pearl for the white parts. 

sprayed silver then Honda red for the red parts for that candy tone look. 

 I used white pearl for the white parts. 



YOUR COMMENTS ARE GREATLY APPRECIATED. 

Upcoming item: MG 1/100 Custom Set for MG RX-78-2 Gundam Ver.3.0 - September Release

Optional Equipment:
Beam Javelin
BLASH-XHB-L-03/N-STD 380mm Hyper Bazooka
BOWA-XBR-M-79-07G Beam Rifle
Gundam Hammer  (later upgraded into the Hyper Hammer)
RX-M-SH-008/S-01025 Shield
Super Napalm

The RX-78-2 Gundam (aka the Gundam or the White Mobile Suit) is the titular mobile suit of Mobile Suit Gundam. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. The unit was primarily piloted by the series' main protagonist Amuro Ray. 

info from: GUNDAM WIKI

● Gundam Plastic Model LED Unit (Yellow) x1

● Hyper Bazooka x1

● Beam Javelin x1

● Gundam Hammer x1

● Water slide decal x1

The led unit is for the eyes to light up creating that realistic effect. Additional bazooka for extra fire power on those action poses. The beam javelin as an alternative the to the usually used sword of the gundam and beam sabers. 

  

To light up the Gunpla LED Unit (Yellow), 2 LR41 batteries are required which is sold separately.

you will also need a Phillips head screwdriver which required to hold the battery cap.

To equip into the "Double Bazooka" mode. 

1 HyperBazooka is included in the MG 1/100 Custom Set. The other Hyper Bazooka included in the MG RX-78-2 Gundam Ver.3.0  which is totally the same as the one included in this product (including the grip to adjust with MG RX-78-2 Gundam Ver.3.0).

Notes from  premium bandai

This product is a limited edition item.

It may be sold at Bandai-Namco events or for other projects.

It cannot be purchased at stores selling plastic models.

There are only a limited number of this product available for sale on 'Premium Bandai'.

We ask for your understanding in the event that the product is sold out.

Product images are of a product in development, and they may differ from the actual product.

The product specifications are current as of June 2013. We ask for your understanding as they may be subject to change.

This product has a limited production run.

When the number produced has been reached, we will stop accepting applications for reservations. Thank you for your understanding.

Price

: HK$ 150.00

Delivery Period (Pending)

: Sep / 2013

Order your item now! premium bandai

pictures courtesy of : premium bandai

Pacific Rim – 18″ Gipsy Danger Action Figure

This is the must have collector’s figure from Pacific Rim! 

The main hero Gipsy Danger receives the deluxe 18″ treatment including enhanced sculptural details, attachable chain-sword weapon, and lights on the chest and head.

Stands an impressive 18″ tall with articulation is good with articulated neck, shoulders, elbows, hips, and knees.

Figure  intricate paint detail to replicate all the battle damage and wear and tear seen on the movie.

The figure has The over 8″ long chain-sword weapon attaches at the forearms and can be wielded on the right or left side. 

I just hoped they would create another sword for this figure so that both hands can have swords attached. 

courtesy of NECA TOYS

7″ Pacific Rim Action Figures Series 1 – Assortment

Gipsy Danger and Crimson Typhoon

Gipsy Danger, Crimson Typhoon, and Knifehead.

From the action movie PACIFIC RIM by Guillermo del Toro 

When an alien attack threatens the Earth’s existence, giant robots piloted by humans are deployed to fight off the menace. 

Series 1 will have a full line of poseable action figures directly from the film. Characters include Gipsy Danger, Crimson Typhoon, and Knifehead.

Figures stand roughly 6″ – 8″ tall and are created directly from the digital files used by ILM in the making of the movie. 

courtesy of: NECA TOYS